32 Channel Video to Fiber Optic,32 Channel Video to Fiber Optics
32 channel video to fiber optic characteristic
Thirty-two Channels Un-compressed CCTV video over one fiber.
8-bit video processing, Compatible with NTSC, PAL, or SECAM CCTV, Instantaneous Transmission.
One Channel Ethernet, Supports 10/100BASE-TX, IEEE Std.802.3.
Digital multiplexing technology.
Support analog Audio, RS-485/232 data, Contact closure and Ethernet over one single-mode fiber.
24-bit audio processing.
Transparent transmission for multi protocol data formats.
Using Wavelength Division Multiplexing(WDM)
32 channel video to fiber optics Video
Channels: 32 simplex
Input/Output Signal: 1.0 Vpk – pk
Bandwidth: 6.5 MHz
Video Sampling Rate:15 MHz
Signal-to-Noise Ratio: >58 dB
Input/Output Impedance: 75 ohms
Differential Phase: 0.7°
Differential Gain: <1%
32 channel video to fiber optical Audio
Input Impedance: 47K ohms unbalanced
Output Impedance: 10K ohms unbalanced
Signal-to-Noise Ratio: >75 dB
Audio Sampling Rate: 58 kHz
Bandwidth: 20 Hz to 20 kHz
32 channel video to fiber Data
Formats: RS-232 (3-wire), TTL, RS-422, RS-485 (2-wire/4-wire) Transparent transmission for Manchester, Biphase, SensorNet
Baud Rate: 0 kbps to 115.2 kbps
Bit Error Rate: <1.0E-9
32 channel video to optic Ethernet
10/100BASE-TX, CAT5 RJ-45, IEEE Std. 802.3, Full Speed 10M/100M Ethernet duplex
32 channel video to optical fiber Optical
Fiber Cable: Single mode
Optical Connector: FC
Emitter: FB or DFB
Wavelength: 1310 nm or 1550 nm
Transmission Distance can reach 100 Km
32 channel video to fiber optic Environmental
Operating Temperature: -25°C to 75 °C
Maximum Humidity: 95% relative, Non-condensing
Mechanical
Dimensions: 440X225X132mm
Construction: Aluminum
32 channel video to fiber optics Power Supply
Protection: Solid-state short circuit protection
External Power Supply, Input:100~240 V AC 50/60Hz Output: 9 V DC, 4 A
32 channel video to fiber optical Electromagnetic compatibility
EMC Directive 2004/108/EC
EN60950-1:2006